SICK ASIC technology - the result of decades of experience in photoelectric sensors
Large, user-friendly potentiometer
Large, bright indicator LEDs
IP 67 enclosure rating
Your benefits
Easy alignment and precise object detection due to a highly visible PinPoint LED
Quick and easy mounting and high durability due to threaded metal inserts
SICK ASIC technology provides high performance, excellent reliability and crosstalk immunity
Easy to adjust due to large, user-friendly potentiometers
Easy to monitor due to large, bright indicator LEDs
Easy installation with SICK accessories
Features
Sensor/detection principle:
Photoelectric proximity sensor, energetic
Dimensions (W x H x D):
12 mm x 31.5 mm x 21 mm
Housing design (light emission):
Rectangular
Sensing range max.:
≤ 300 mm 1)
Sensing range:
≤ 250 mm
Type of light:
Visible red light
Light source:
PinPoint LED 2)
Wave length:
650 nm
Adjustment:
Mechanical spindle, 5 turns
Light spot size (distance):
Ø 7 mm (90 mm)
1) Object with 90 % reflectance (referred to standard white, DIN 5033) 2)Average service life of 100,000 h at TA = +25 °C
Mechanics/electronics
Supply voltage:
10 V DC ... 30 V DC 1)
Residual ripple:
± 10 % 2)
Power consumption:
≤ 30 mA 3)
Output type:
NPN, open collector
Switching mode:
Light/dark switching
Switching mode selector:
Selectable via light/dark selector
Output current Imax.:
≤ 100 mA 4)
Response time:
< 1,250 ms 5)
Switching frequency:
± 500 Hz 6)
Connection type:
Cable, 3-wire, 2 m 7)
Cable material:
PVC
Conductor cross-section:
0.14 mm²
Circuit protection:
A, B, D 8)9)10)
Protection class:
III
Weight:
60 g
Polarisation filter:
-
Optics material:
PMMA
Enclosure rating:
IP 67
Ambient operating temperature:
-25 °C ... +55 °C 11)
Ambient storage temperature:
-40 °C ... +70 °C
UL File No.:
E348498
Signal voltage NPN HIGH/LOW:
Approx. VS / ≤ 3 V
Housing material:
ABS/PC, Plastic
1) Limit values, operation in short-circuit protected network max. 8 A 2) May not exceed or fall short of VS tolerances 3) Without load 4) At Vs > 24 V, IA max = 50 mA 5) Signal transit time with resistive load 6) With light/dark ratio 1:1 7) Do not bend below 0 °C 8) A = VS connections reverse-polarity protected 9) B = inputs and output reverse-polarity protected 10) D = outputs overcurrent and short-circuit protected 11) Temperature stability after adjustment +/-10°C
在線客服
企業(yè)微信
點擊圖片查看原圖
[VIP第3年] 指數(shù):2
通過認(rèn)證 
